To work out how to bridge to Injective, start from where your funds sit. From Ethereum, use the Injective Bridge with MetaMask; it assigns you an inj address tied to the same key. From Solana, the Injective Bridge uses Wormhole with Phantom. From Cosmos chains, send over IBC with Keplr. Native USDC also arrives through Circle’s CCTP. Since Injective’s native EVM went live on November 11, 2025, the same balance is visible to both Cosmos-style and EVM apps, so you no longer bridge between two halves of Injective.
- One Injective account has two address formats: inj1… (Cosmos-style) and 0x… (EVM). Both point to the same funds.
- The Injective Bridge connects Ethereum (via the Peggy bridge), Solana and other chains (via Wormhole) and Cosmos chains (via IBC).
- USDC on Injective is native through CCTP and follows the MultiVM Token Standard, so EVM and Cosmos apps share it.
- Gas is paid in INJ, at a minimum gas price of 160,000,000 inj per gas unit, which makes typical fees tiny.
- Leap Wallet shut down in May 2026; use Keplr or MetaMask instead.
One Account, Two Faces: Injective Wallets and Addresses
Injective’s account system uses Ethereum’s secp256k1 key type and derivation path. In plain terms, the private key behind your MetaMask address also controls an Injective account. Injective displays that account as a bech32 address starting with inj for Cosmos-style tools and as a 0x hex address for EVM tools. Injective’s documentation gives an example pair (inj14au322… and 0xAF7915…) and stresses that they are the same account.
That has practical consequences:
- MetaMask users can receive on Injective without creating a new wallet. The Injective Bridge and Injective Hub derive the inj address automatically.
- Keplr users see the inj address natively and can use it for IBC transfers and staking.
- EVM apps on chain ID 1776 see your 0x address and the same token balances, thanks to the MultiVM Token Standard (MTS).
Leap Wallet, once a popular Cosmos option, wound down its apps and extension on May 28, 2026. If you used Leap, import your recovery phrase into Keplr or another compatible wallet; funds stay on-chain. For background on what Injective is built for, see our Injective explainer.
How to Bridge to Injective by Starting Chain
| You are starting on | Route | Wallet | What arrives on Injective | Speed |
|---|---|---|---|---|
| Ethereum | Injective Bridge (Peggy) | MetaMask | Peggy-bridged ERC-20s, e.g. ETH arrives as WETH | After Ethereum confirmations plus bridge processing |
| Ethereum or L2 (USDC) | CCTP-based routes, or Skip:Go | MetaMask | Native USDC | Seconds to minutes; a live Skip:Go quote showed about 30 seconds |
| Solana and other Wormhole chains | Injective Bridge (Wormhole) | Phantom, then MetaMask or Keplr | Wormhole-wrapped assets | Minutes, after source finality and guardian signatures |
| Cosmos Hub, Osmosis, Noble and other IBC chains | IBC transfer | Keplr | IBC denominations (ibc/…) | Usually under a minute or two |
| Centralized exchange | Withdraw INJ (or supported tokens) on the Injective network | Any wallet showing an inj address | Native INJ | Exchange processing time |
Bridge ETH to Injective With MetaMask
Injective’s own walkthrough for Ethereum uses the official Injective Bridge. The steps:
- Open the Injective Bridge (Injective’s guide gives bridge.injective.network and asks you to verify the domain before connecting) and connect MetaMask with the account holding your ETH.
- The bridge shows the inj address tied to that MetaMask key; you do not need to paste a separate destination.
- Set the source to Ethereum mainnet and the asset to ETH; set the destination to Injective and the asset to WETH.
- Enter the amount, leaving ETH aside for Ethereum gas, review the received amount, and approve in MetaMask.
- Track the transfer on the bridge page or on Injective’s explorer, then confirm the WETH balance in Injective Hub.
ERC-20 tokens follow the same path but require an approval transaction first. Deposits wait for Ethereum confirmations before validators attest to them on Injective, so allow some minutes rather than seconds.
Bridge USDT to Injective (and USDC)
For dollars, the token you pick matters more than the bridge. Injective lists a USDT contract under the MultiVM Token Standard, and USDC is native via CCTP, deployed with Circle’s v2 contracts (Injective’s CCTP domain ID is 29). Two practical routes:
- Exchange withdrawal: some exchanges let you withdraw USDT directly on the Injective network. If yours does, it is usually the cheapest option because it skips Ethereum gas.
- Cross-chain router: Skip:Go routes USDC from Ethereum or an L2 into Injective. A quote we pulled from Skip:Go’s public API on October 25, 2026 for 100 USDC from Ethereum showed roughly 30 seconds and a bridge fee of about $2.61, delivered as USDC via Noble and IBC. The same route’s fee was a far smaller share of a larger transfer. Quotes change constantly, so treat that as an illustration, not a price.
Before you buy a stablecoin on Injective, check which contract or denomination a dApp actually uses. Peggy-bridged USDT, Wormhole-bridged USDT and IBC USDT can all appear under similar names.
IBC Transfer to Injective From Cosmos Chains
From the Cosmos Hub, Osmosis or Noble, IBC is the natural route. Injective’s guide uses Keplr: choose the source chain, enter your inj address as the recipient (Keplr fills it in if Injective is enabled), and send. Most IBC transfers land within a minute or two. When we requested a Skip:Go quote for 10 ATOM to INJ on October 25, 2026, the route swapped through Osmosis and arrived in about 60 seconds with no separate bridge fee beyond swap costs and gas.
IBC tokens show up with ibc/ denominations. That is normal: it records which channel the token came through. Our Cosmos bridging guide explains IBC paths in more detail if you are coming from further away.
Solana to Injective Through Wormhole
For SOL, Solana USDC or other Wormhole-supported assets, Injective’s bridge integrates Wormhole. Connect Phantom for the source side and MetaMask or Keplr for the Injective side. Wormhole’s guardian network signs a message once the Solana transaction finalizes, and the wrapped asset is minted on Injective. You will need a small amount of SOL for Solana fees. Wrapped assets depend on Wormhole’s security; if you plan to hold a large balance long term, consider whether a native version, such as CCTP USDC, exists instead.
INJ for Gas: How Little You Need
Every Injective transaction pays fees in INJ. Injective’s documentation sets the minimum gas price at 160,000,000 inj per unit of gas and gives a worked example: a transaction using 104,519 gas costs about 0.0000167 INJ. Even complex trades rarely cost a meaningful amount. The catch is that you need some INJ to start. Options:
- Withdraw a little INJ from an exchange on the Injective network alongside your first deposit.
- Use a route that swaps part of your transfer into INJ on arrival.
- Ask a friend with INJ to send a few cents’ worth to your inj address; at Injective’s gas prices that covers many transactions.
Once you hold INJ, you can also stake it with validators. Our guide on how to stake Injective covers delegation, unbonding and validator choice.
Injective EVM Bridge Questions: Do You Need One?
Before November 2025, Injective’s EVM work lived on a testnet and some guides described “bridging” between Injective’s EVM and its Cosmos side. On mainnet today, tokens that follow the MultiVM Token Standard are a single balance usable by EVM contracts and native modules alike. Injective’s documentation states that MTS tokens can be used in all Injective modules “without using a bridge.” Wrapped INJ (wINJ) exists for EVM contracts that need an ERC-20 form of INJ.
If you want to add the EVM network to MetaMask, use chain ID 1776 and Injective’s Blockscout explorer. Injective lists its RPC endpoints in the EVM network information page of its docs.
Bridging Back Out of Injective
- To Ethereum via Peggy: withdrawals are batched and relayed back to Ethereum by Injective’s validator set, and include a bridge fee displayed before you confirm. They usually take longer than deposits; the bridge shows the estimate and status.
- To Solana or other Wormhole chains: reverse the Wormhole route in the Injective Bridge; you may need to redeem on the destination chain, which costs that chain’s gas.
- To Cosmos chains: send over IBC with Keplr.
- USDC: route out over CCTP to any supported chain.
- To an exchange: deposit INJ on the Injective network; copy any memo the exchange displays.
Third-party bridges such as deBridge also support Injective; deBridge’s fee page lists a flat 0.09 INJ fee for orders created on Injective plus a 4 basis point variable fee. For a ranked comparison of bridge designs, see the best crypto bridges, and for how all of these fit together, our crypto bridging hub.
FAQ
Can I use MetaMask on Injective?
Yes. Injective accounts use the same key type as Ethereum, so your MetaMask key controls an Injective account. The Injective Bridge and Hub show its inj address automatically, and Injective’s EVM network (chain ID 1776) shows the same balance under your 0x address. You do not need a separate seed phrase.
What is the cheapest way to bridge USDT to Injective?
If your exchange supports USDT withdrawals on the Injective network, that is usually cheapest, because it avoids Ethereum gas. Otherwise, a cross-chain router from an L2 is often cheaper than bridging from Ethereum mainnet. Check that the USDT version you receive is the one your target dApp uses.
How long does an Injective bridge withdrawal to Ethereum take?
Withdrawals through the Peggy bridge are batched and relayed by validators, so they take longer than deposits and include a fee shown in the interface. The bridge displays status as the batch progresses. If speed matters, a CCTP route for USDC or an exchange round trip can be faster.
Do I need to bridge between Injective EVM and Injective native?
No, for tokens that follow the MultiVM Token Standard. Since the native EVM mainnet launched in November 2025, these tokens are one balance that EVM contracts and native modules can both use. INJ itself is wrapped as wINJ for EVM contracts that need an ERC-20 form.
Crypto is volatile and risky; this is education, not financial advice. Do your own research.
